新品！柳工M200E銑刨機銷往海外

日，柳工銑刨機M200E陸續發往海外，將為高速公路、國道、省道、市政道路以及機場跑道等大面積維修工程提供強有力的支持。

Recently, LiuGong M200E cold planer has been successively delivered overseas, providing strong support for large-scale maintenance projects such as highways, national highways, provincial highways, municipal roads and airport runways.

M200E采用先進的設計理念和技術，優化整機重量，保證了極高的施工效率和施工靈活性。M200E采用全液壓四驅配置，爬坡能力高達100%；配備了液壓差速鎖，確保前后馬達流量一致，輪胎間的速度差異小于5%，驅動力更強；采用大扭矩馬達和減速機，銑刨泵排量達到130L/min，馬達排量達90L/min，搭載力士樂減速機最大扭矩高達24000N·m，可高效實現銑刨作業。此外，M200E支腿可向前折疊至貼近車架位置，減小了轉彎半徑，提高了貼邊作業工況的適應性且有利于狹窄工況。

The M200E adopts advanced design concepts and technologies, optimizing the overall weight to ensure extremely high construction efficiency and flexibility. With a full hydraulic four-wheel drive configuration, the M200E boasts a climbing ability of up to 100%. Equipped with hydraulic differential locks, it ensures consistent flow between front and rear motors, with speed differentials between tires of less than 5%, resulting in stronger driving force. Utilizing high-torque motors and reducers, the milling and planing pump achieves a displacement of 130L/min, motor displacement of 90L/min, and is equipped with a Rexroth reducer with a maximum torque of up to 24000N·m, enabling efficient milling and planing operations. Additionally, the M200E's support legs can be folded forward to be close to the chassis position, reducing the turning radius, improving adaptability to edge-working conditions, and facilitating operations in narrow spaces.

柳工擁有銑刨機、攤鋪機、瀝青拌合站、壓路機等一系列產品，具有完善的道路施工設備全面解決方案，提供從售前設備選型、售中技術支持到售后一站式服務，全程為客戶提供專業、高效的服務保障。

LiuGong offers a comprehensive range of products including cold planers, pavers, asphalt mixing plants, and rollers, providing a complete solution for road construction equipment. With a complete range of services from pre-sales equipment selection, in-sales technical support, to after-sales one-stop service, LiuGong ensures professional and efficient service support throughout the entire process for its customers.

柳工M200E銑刨機

主要參數

項目

Projecct

單位

Unit

M200E

銑刨寬度

width of milling

mm

2000

銑刨深度

depth of milling

mm

0-330

最大行駛速度

Max drive speed

m/min

95

理論輸料能力

Theoretical conveying capacity

m3/h

375

END

有獎?wù)骷?/strong>